The Arduino Pro Mini is a microcontroller board based on the ATMega328 . It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or an ISP programmer to program the device.
The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires.
|Input Voltage||5 – 12V|
|Digital I/O Pins||14 (of which 6 provide PWM output)|
|Analog Input Pins||6|
|DC Current per I/O Pin||40 mA|
|Flash Memory||32 kB (of which 0.5 kB used by bootloader)|
|Clock Speed||16 MHz|