Product Information
This small 12V pump is ideal for use in projects requiring water cooling, or for filling water tanks in electrolysers. It can be run from 2V to 12V. At 12V it will pump very fast, and can empty a cup of water in 5 seconds! For continuous running it should be ran at low voltage or slowed down using a suitable motor speed controller.
It has two outlet nozzles which can be used as independent outlets. The water will come out of one connector or the other depending on the direction of motor spin or the polarity of the applied voltage.
115mm x 40mm x 55mm
The table below shows the max current drawn at various voltages. The current will also vary in relation to the length of hoses used, pressure, and how high the water will be pumped to.
| Voltage |
Current (amps) |
| 2 V |
1A |
| 5V |
1.6A |
| 8V |
2.4A |
| 10V |
2.7A |
| 12V |
3.3A |
